argon audio BASS10 Manual do Proprietário - Página 7

Procurar online ou descarregar pdf Manual do Proprietário para Altifalantes argon audio BASS10. argon audio BASS10 8 páginas.

Specifications

Type: Closed pressure cabinet

Speaker: 1 woofer Driver

Inputs: L/R RCA stereo input, Speaker terminal inputs

Output: Speaker terminal output for sat. speakers

Main voltage: 220-240V, 50/60Hz

Amplifier type: Analogue Hi-Fi Amplifier

Woofer: 8" Long stroke Woofer Speaker

Phase regulation: yes 0-180 degrees

Volume regulations: yes

Auto stand-by: yes after 10 min.

Frequency Response: (-3db): 40Hz-200Hz

Cross over Frequency: 40-120Hz adjustable

Output Power: 1x100W (RMS)

Weight: 8 kg

w w w . a r g o n a u d i o . c o m

Basic troubleshooting

If the LED indicator lamp does not light up, check...

that the power cord (6) is firmly plugged into the wall outlet

that the POWER switch (4) on the rear panel is ON

that the mains voltage is correct and matching the

subwoofer

the fuse, if fuse (5) need to be replaced only use same type

and value

If no sound, check...

that the subwoofer is turned on (indicator LED lamp

glows blue)

that the VOLUME control (1) on the rear panel is not all the

way down

that the input cable (10) or (7, 8) is firmly plugged in both

subwoofer and amplifier (and sat. speaker if using 7, 8 if

you are using that configuration)

that the subwoofer gets a signal from the amplifier

– check tone on most av-receivers

B A S S 8