Digitrax SoundFX SDN144A1 Manual - Página 8

Procurar online ou descarregar pdf Manual para Conversor de multimédia Digitrax SoundFX SDN144A1. Digitrax SoundFX SDN144A1 12 páginas. Drop in mobile decoder for atlas n scale sd60/40 and similar locomotives

Imprimir página

Other LocoMotion

Travel & Scaleable Speed Stabilization (Back EMF) Features

Switching speed is controlled by CV54. The factory setting is 000 for OFF. To

turn on the switching speed feature, program CV54 to a value of 001. When

this feature is on, use F6 to activate and deactivate switching speed. With the

feature on the throttle's target speed is effectively reduced by about 50% and

the effects of accel and decel programmed into the decoder are reduced by 1/4.

This is useful for yard switching operations.

Normal Direction of Travel is controlled by CV29. See your decoder manual

for additional information on the settings for CV29.

Decoder Reset CV08

Decoder reset lets you reset all CV values to the initial factory settings. To

reset all CV values, program CV08 to a value of 008. You also have the option

of resetting all values except the 28 speed step tables. To do this,

program CV08 to a value of 009.

Digitrax SoundFX ™ System

Digitrax SoundFX™ lets you make your locos sound in scale like the real

thing!

The SoundFX™ sound CVs in the range of CV140 to CV256 let you cus-

tomize your decoder without having to reprogram or change the installed

sound scheme.

Standard decoder CVs in the range of CV01 to CV120 operate the same as for

a non-sound FX

etc.) CV58 is used as Master Volume, and CV60 is used to select an

alternate scheme, if provided in the sound project.

Sound CV155 is provided to select Diesel engine "notching" modes. The

default of CV155= 00 provides "automatic notching" that changes the

diesel RPM settings at 8 distinct throttle speeds that are controlled by Sound

CV132.

Sound CV155=01 selects "semi-automatic notching" mode that allows F6 ON

to increase the notch from the current throttle setting and F7 ON to decrease

back towards the lowest current throttle notch setting.

Sound CV155=02 selects "manual notching" mode that allows F6 ON to

increase the notch setting and F7 ON to decrease the notch setting

irrespective of the throttle setting, which controls just the motor speed.

The decoder's sound scheme can be reloaded using a Digitrax PR2 or PR3 pro-

grammer and a sound project file (for example AC4400.spj) from the

Digitrax Sound Depot web site. Typical sound downloads take between 50

and 100 seconds depending on the project complexity and file size.

The following tables show the CVs used in this decoder version and how it is

set up at the factory to operate various sounds using your throttle.

Complete Train Control

Run Your Trains, Not Your Track!

Features: Switching Speed, Normal Direction of

Digitrax decoders (they control motor and light functions