argon audio Octave Início rápido - Página 2

Procurar online ou descarregar pdf Início rápido para Altifalantes argon audio Octave. argon audio Octave 2 páginas.

Connections

You can connect your TV to the Octave Soundbar using an optical

cable, coax cable or an RCA cable. The soundbar also has built in

Bluetooth for playing music from a phone, tablet, computer etc. If you

have a subwoofer, you can connect this to the subwoofer output. The

soundbar will then stop playing any bass below 80 Hz, so your

subwoofer crossover should be set to 80 Hz or above.

Quick start

Start up

Mount the soundbar on your wall, or place it on your TV bench. If

possible, place the soundbar so that it is in ear height when sitting

in your preferred listening position.

Connect the Power cord into an electric outlet and into the back of

the Octave soundbar.

Connect the soundbar to your TV using either optical, coax or

RCA.

You can use the included remote control to switch between the

inputs, or you can press the "power" button on top of the soundbar

to cycle between them.

Basic Operating

Note that when playing Bluetooth, you can adjust the volume on

your device as well as on the soundbar. Be aware that if you have

turned the volume up on the soundbar, and turn back to one of the

other inputs, they might be quite loud.

If you need to remove your phone from Bluetooth devices, you can

either do this under the Bluetooth settings on your phone, or set

the soundbar back to pairing by holding the "Pair" button on the

remote or on the soundbar until the LED starts flashing blue.

Remote function from Samsung and Sony TV remotes: Octave

soundbar supports most Samsung, LG and Sony remote functions

for "Volume +/-" and "Mute". If you use the Octave soundbar with a

Samsung, LG or Sony TV it allows you to have only one remote

control (the TV remote) to control the basic and useful functions.

Inputs

Sub out: For subwoofer connection using a subwoofer cable

R & L: RCA connection for some older TVs, CD player, streaming etc.

Coax: Digital connection using a coax cable

Optical: Digital connection using an optical cable

LED colors

The color of the LED signifies different inputs.

Blue: Bluetooth (blinking if in pairing mode)

Purple: Optical

White: Coax

Green: RCA

w w w . a r g o n a u d i o . c o m

O c t a v e S o u n d b a r Q u i c k s t a r t