AcueLighting Profile S300 Manual do utilizador - Página 7

Procurar online ou descarregar pdf Manual do utilizador para Equipamento de DJ AcueLighting Profile S300. AcueLighting Profile S300 9 páginas. 300w led framing profile spotlight

Imprimir página

DMX Protocol

1 Channel Mode

CH1

2 Channels Mode

CH1

CH2

3 Channels Mode

CH1

CH2

CH3

Fixture Cleaning

Due to fog residue, smoke, and dust cleaning the internal and external optical lenses and mirror should be carried

out periodically to optimize light output. Cleaning frequency depends on the environment in which the fixture

operates (I.e. smoke, fog residue, dust, dew). In heavy club use we recommend cleaning on a monthly basis. Periodic

cleaning will ensure longevity, and crisp light output.

To clean the fixture:

1. Disconnect the fixture from power and allow it to cool for at least 10 minutes.

2. Vacuum or gently blow away dust and loose particles from the outside of the fixture with low-pressure

compressed air.

3. Clean the surfaces by wiping gently with a soft, clean lint-free cloth moistened with a weak detergent solution.

Do not rub glass surfaces hard: lift particles off with soft repeated pressure. Dry with a soft, clean, lint-free

cloth or low-pressure compressed air. Remove stuck particles with an unscented tissue or cotton swab

moistened with glass cleaner or distilled water.

4. Check that the fixture is dry before connecting to power.

Fuse Replacement

This fuse is located in a fuse holder next to the MAINS OUT socket on the connections panel. To

replace a fuse:

1. Disconnect the fixture from power and allow it to cool for at least 10 minutes.

2. Unscrew the cap of the fuse holder and remove the fuse. Replace with a fuse of the same size and rating

only.

3. Reinstall the fuse holder cap before connecting to power.

Troubleshooting

Listed below are a few common problems that you may encounter, with solutions.

The fixture does not work, no light

•

Check the connection of power and main fuse. Be sure the external fuse has not blown.

•

Measure the mains voltage on the main connector.

Function

Dimmer

Function

Dimmer

Strobe

Function

Dimmer

Dimmer fine

Strobe

Function Control

000-255: 0-100% dimmer

Function Control

000-255: 0-100% dimmer

000-255: Strobe with speed increasing

Function Control

000-255: 0-100% dimmer

000-255: 16 bit dimmer

000-255: Strobe with speed increasing

V1.0