Cisco Secure Firewall Management Center 2700 Manual de iniciação - Página 18

Procurar online ou descarregar pdf Manual de iniciação para Hardware de rede Cisco Secure Firewall Management Center 2700. Cisco Secure Firewall Management Center 2700 22 páginas.

Imprimir página

IPMI Utility Installation

Note

Prerequisites

• Install an Intelligent Platform Management Interface (IMPI) utility on your local computer. For more

• Determine which commands are needed to access an appliance using the IPMI tool. For more information,

To setup LOM:

Step

IPMI Utility Installation

You can use a third-party IPMI utility on your computer to create an SOL connection to the appliance. IPMItool

is standard with many Linux distributions, but on Mac and Windows systems you must install a utility.

If your computer is running Mac OS, install IPMItool. First, confirm that your Mac has Apple's Xcode

developer tools package installed. Ensure that the optional components for command line development are

installed (UNIX Development and System Tools in newer versions, or Command Line Support in older

versions). Finally, install MacPorts and IPMItool. For more information, see

technologies/tools/

For Windows environments, use ipmiutil, which you must compile yourself. If you do not have access to a

compiler, you can use ipmiutil itself to compile. For more information, see http://ipmiutil.sourceforge.net/.

Preconfigure Management Centers

You can preconfigure your management center at a staging location (a central location to preconfigure or

stage multiple appliances) and deploy it at a target location (any location other than the staging location).

To preconfigure and deploy an appliance to a target location, perform the following steps:

Cisco Secure Firewall Management Center 1700, 2700, and 4700 Getting Started Guide

Firewall appliances also support LOM. You can configure LOM and LOM users for each appliance using

each appliance's local web interface. You cannot use the management center to configure LOM on a firewall

device. Similarly, because users are managed independently for each appliance, enabling or creating an

LOM-enabled user on the management center does not transfer that capability to users on firewall devices.

information, see

IPMI Utility Installation, on page

see

Cisco Secure Firewall Management Center Administration

Task

Enable LOM

Enable LOM user access

Use a third-party IPMI utility to

create a SOL connection to the

appliance.

and http://www.macports.org/.

About the Secure Firewall Management Center 1700, 2700, and 4700

18.

Guide.

GUI Path

System > Users > Users

System > Configuration

> Console Configuration

> Lights-Out

Management

https://developer.apple.com/

More Info

Cisco Secure Firewall

Management Center

Administration Guide

Cisco Secure Firewall

Management Center

Administration Guide

IPMI Utility Installation,

on page 18