Cisco SG 100-16 Manual de início rápido - Página 7
Procurar online ou descarregar pdf Manual de início rápido para Hardware de rede Cisco SG 100-16. Cisco SG 100-16 13 páginas. Unmanaged rackmount switches
Imprimir página
3
Features of the Unmanaged
Rackmount Switch
This section describes the exterior of the unmanaged rackmount switches
that provide non-blocking, wire-speed switching for your network clients.
Front Panel Ports
The ports and LEDs are located on the front panel of the switch.
RJ-45 Ethernet Ports —Use these ports to connect network devices, such
as computers, printers, and access points, to the switch. The auto-sensing,
Ethernet (802.3) ports are used for wired network communications. Each
Ethernet port supports network speeds of 10 Mbps, 100 Mbps, or
1000 Mbps.
MiniGBIC (if present)—The miniGBIC (gigabit interface converter) ports are
connection points for miniGBIC modules, so the unmanaged rackmount
switch can uplink to other switches by using optical fiber.
• MiniGBIC ports are compatible with Cisco miniGBIC modules MGBSX1,
MGBLH1, MGBT1, MGBLX1, and MGBBX1, as well as other brands of
miniGBIC modules.
• MiniGBIC interface is a combination port, shared with one other RJ-45
interface. When the MiniGBIC is active, the closest RJ-45 port is
disabled.
• The LEDs on RJ-45 respond to the miniGBIC interface traffic.
Front Panel LEDs
System LED—Lights green when the switch is powered on.
Link/Act LED—(Green) Lights when a link between the corresponding port
and another device is detected. Flashes when the port is passing traffic.
Cisco Unmanaged Rackmount Switches
1
13
2
14
3
15
4
16
5
17
6
18
7
19
8
20
LINK
GIGABIT
ACT
9
21
10
22
11
23
12
24
6