Digitus 3-Port Combo DVI KVM Switch Manual do utilizador - Página 11

Procurar online ou descarregar pdf Manual do utilizador para Interruptor Digitus 3-Port Combo DVI KVM Switch. Digitus 3-Port Combo DVI KVM Switch 11 páginas. 3-port usb - ps/2 kvm switches with dvi and audio

Imprimir página

FCC Statement

This device generates and uses radio frequency and may cause interference to radio and television reception if not installed

and used properly. This has been tested and found to comply with the limits of a Class B computing device in accordance with

the specifications in Part 15 of the FCC Rules. These specifications are designed to provide reasonable protection against such

interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation.

If this device does cause harmful interference to radio or television reception, which can be determined by plugging the device

in and out, the user can try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the device and receiver.

Connect the computer into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Safety Information:

This device may only be operated in enclosed, dry rooms. To prevent the risk of fire or electrical shock, the device must be

protected from moisture. In the event of a defective power plug, please contact an authorized retailer. In the event of damage to

the housing or the power plug, do not operate. Do not open the device. Repairs may only be performed by an authorized

retailer.

Note:

In the event of incorrect installation and improper use in a residential area, the device may cause disruptions in radio devices

and other electronic devices. Proper use means that the device is operated with shielded connector cables as far as possible,

for network products also with shielded cables of category 5e and higher. The device was tested and lies within the limits for

computer accessories of class A according to the requirements of EN 55022.

Warning:

This is a class A device. This device can cause radio interference in residential areas; in this case, the operator may be

required to perform and bear the costs for appropriate measures.

Conformity Declaration:

The device fulfils the EMC requirements of EN 55022 class A for ITE and EN 55024. Devices with external or built-in power

supply also fulfil the requirements of EN 61000-3-2 and EN 61000-3-3. The basic protection requirements of the " EMC

Directive" 89/336/EEC are therefore fulfilled. The CE conformity has been certified. The corresponding declarations are

available from the manufacturer.

Trademarks:

All company, brand and product names used in these instructions are trademarks or registered marks of the corresponding

companies.