Cisco TelePresence MCU MSE 8510 Começar a trabalhar - Página 7

Procurar online ou descarregar pdf Começar a trabalhar para Hardware de rede Cisco TelePresence MCU MSE 8510. Cisco TelePresence MCU MSE 8510 16 páginas. Getting started

Imprimir página

Figure 3: Closing the retaining latches on the front of a blade

Step two: Connect to Ethernet Port A

Connect an Ethernet cable from Ethernet Port A to an Ethernet switch (rather than a

hub, to minimize interference from other devices on the network). The Ethernet

port is a 10/100/1000 Mbps auto-sensing connection.

Ethernet Ports B, C and D may not be supported in the software supplied

with your blade. Do not connect to these ports unless the web interface

allows you to configure them. Do not connect multiple ports to the same

subnet unless instructed to do so by the web interface.

Installing the MCU MSE 8510