Cisco UCS B200 M3 Nota de instalação e manutenção - Página 17

Procurar online ou descarregar pdf Nota de instalação e manutenção para Hardware de rede Cisco UCS B200 M3. Cisco UCS B200 M3 28 páginas. Blade server
Também para Cisco UCS B200 M3: Manual de instalação (34 páginas), Nota de instalação e manutenção (36 páginas), Nota de instalação e manutenção (37 páginas), Manual (8 páginas), Upgrade Manual (21 páginas)

Figure 13: Using the CPU Pick and Place Tool to Insert the CPU

Step 6

Close the socket latch. See callout 1 in the following figure.

Step 7

Secure the first hook, which has the following icon: See callout 2 in the following figure.

Step 8

Secure the second hook, which has the following icon:

Figure 14: Replacing the Heat Sink (B200 M3 Shown)

Step 9

Using the syringe of thermal grease provided with replacement CPUs and servers, add 2 cubic centimeters of thermal

grease to the top of the CPU where it will contact the heat sink. Use the pattern shown. This should require half the

contents of the syringe.

Caution

The thermal grease has very specific thermal properties. Thermal grease from other sources should not be

substituted because it may lead to damage.

Alignment mark on the tool

button/handle

See callout 3 in the following figure.

Alignment mark on the CPU

socket