Cisco WS-F6K-MSFC2 Nota de instalação - Página 4

Procurar online ou descarregar pdf Nota de instalação para Hardware de rede Cisco WS-F6K-MSFC2. Cisco WS-F6K-MSFC2 18 páginas. Catalyst 6000 series multilayer switch feature card 2

Imprimir página

Features

Features
The MSFC2 ships with 128-MB SDRAM at 100 MHz with Error Checking and Correction (ECC)
(single-bit error detection and correction; 2-bit error detection) as the default and is upgradeable to
256 MB or 512 MB.
Table 1
Table 1
Layer 3 Forwarding Features
Wire-speed IP, IP multicast, and IPX routing between VLANs (switches running the Cisco
IOS for the Catalyst 6000 Family of Switches product can also route between ports)
Support for up to 128,000 entries for IP network prefixes, IP unicast and multicast addresses,
IPX network numbers, and MAC addresses
FIB
Destination-based load sharing among equal cost paths
Layer 3 Routing Protocols
Static IP routing
IP routing protocols: IGRP
IP multicast routing protocols: PIM
IPX routing protocols: RIP, NLSP
Layer 3 Related Protocols
IGMP
IGMP snooping
CGMP
Full ICMP
GDP
IRDP
MSDP
MBGP
Catalyst 6000 Family Multilayer Switch Feature Card 2 Installation Note
4
lists the Cisco IOS features available for the MSFC2.
Cisco IOS Features
2
and adjacency database support as defined in other Cisco routers
3
, EIGRP
10
v1 and v2
11
server support
12
support
13
14
15
16
1
4
5
6
, OSPF
, RIP
, and RIP-2
7
(sparse and dense mode) and DVMRP
9
, and EIGRP
8
interrupt
78-10605-03