Cisco 5100 Manual de instalação do hardware - Página 21
Procurar online ou descarregar pdf Manual de instalação do hardware para Servidor Cisco 5100. Cisco 5100 32 páginas. Enterprise network compute system
Também para Cisco 5100: Preparação para a instalação (6 páginas)
Imprimir página
Installing the Device
•
•
•
•
•
Unpacking the Device
The device, accessory kit, publications, and any optional units may be shipped in more than one container.
When you unpack the containers, check the packing list to ensure that you have received all the items on the
list.
Only unpack the product when you are ready to install it. This will help prevent accidental damage.
Installing the Cisco 5100 ENCS
If not already installed, the DIMMs and the M.2 storage module must be installed before rack-mounting or
wall-mounting the chassis.
Warning
Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Statement
1030
Rack-Mounting the Chassis
The Cisco 5100 ENCS can be installed in 19-inch (48.26-cm) racks. Use the standard brackets shipped with
the chassis for mounting the chassis in a 19-inch EIA rack.
Warning
To prevent airflow restriction, allow clearance around the ventilation openings to be at least: 1-inch (25.4-mm)
Statement 1076
You can mount the device in the following ways:
Unpacking the Device, on page 15
Installing the Cisco 5100 ENCS, on page 15
Grounding the Chassis, on page 18
Powering On the Server, on page 19
Initial Server Setup, on page 19
Cisco 5100 Enterprise Network Compute System Hardware Installation Guide
3
C H A P T E R
15