Cisco AS5800 Manual - Página 14
Procurar online ou descarregar pdf Manual para Servidor Cisco AS5800. Cisco AS5800 16 páginas. Access server channelized t1/e1 trunk cards
Também para Cisco AS5800: Manual (22 páginas)
Imprimir página
Configuring the CT3 Trunk Card
Table 3-3
Command
Step 13
AS5800(config)# dial-tdm-clock priority
{ 1 - 50 } { external | trunk-slot } { 0 - 5 }
ds3-port 0 port { 1 - 28 }
Step 14
AS5800# copy running-config
startup-config
1. To deactivate a command functionality, type no before the command.
To verify your software configuration, you can enter show commands to display clock (
) and controller (
clock
privileged EXEC mode. Some examples:
AS5800# show dial-shelf clock
Primary Clock:
--------------
Slot 12:
System primary is 1/1/0:2 of priority 213
TDM Bus Master Clock Generator State = NORMAL
Backup clocks:
Source
-------------------------------------------------------------
Trunk
Trunk
Trunk
Status of trunk clocks:
-----------------------
Slot
0
1
Cisco AS5800 Universal Access Server Dial Shelf Card Guide
3-14
T3 Configuration Commands (continued)
show controller t3
Slot
Port
DS3-Port
0
1
0
0
2
0
1
4
0
Ds3
2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
Port
Type
8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1
0
T3
G G G G G G G G G G G G G G G G G G G G G G G G G G G G
0
T3
B B B B B B B B B B B B B B B B B B B B G G G G G G G G
Description
Configure clock priority, which is a value from 1 to 50.
Select a clocking source by selecting an external
reference clock or a trunk card. If you are using an
external reference clock, no other CLI is needed. If you
are using a trunk card, select a dial shelf slot from
0 to 5.
Select the T3 port number, which has a value of 0.
Save your changes when ready.
) settings. To enter show commands, you must be in
Priority
Status
206
Bad
212
Bad
225
Good
Chapter 3
Channelized T3 Trunk Card
show dial-shelf
State
Default
Default
Default
78-7097-03