Epson B107011F - GT 10000 Manual de informações do produto - Página 2
Procurar online ou descarregar pdf Manual de informações do produto para Scanner Epson B107011F - GT 10000. Epson B107011F - GT 10000 8 páginas. Color flatbed scanner
Também para Epson B107011F - GT 10000: Manual (11 páginas), Atualização (1 páginas), Brochura e especificações (2 páginas)
Imprimir página
EPSON GT-10000
Noise:
Under 50 db (operating)
Dimensions:
Width: 25.8 inches (656 mm)
Depth: 18.0 inches (458 mm)
Height: 6.9 inches (176 mm)
Weight:
Approximately 46.3 lb (21 kg)
Electrical
Input voltage
range:
100 to 120 VAC
220 to 240 VAC; universal auto-switching
Rated frequency:
50 to 60 Hz
Rated current:
100 to 120 VAC—1.2 A
220 to 240 VAC—0.7 A
Power
consumption:
Operating
Approximately 50 W (approximately
55 W with the ADF
Check the label on the back of the scanner for
voltage information.
Environmental
Temperature:
Operating
41 to 95 °F (5 to 35 °C)
Standby
–13 to 140 °F (–25 to 60 °C)
Humidity (without
condensation):
Operating
10 to 80%
Standby
10 to 85%
Operating
conditions:
Ordinary office or home conditions; avoid
dust, direct sunlight, or strong light. Be sure
the outlet provides enough power.
Safety Approvals
120 V
Safety standards:
UL 1950 with D3
CSA C22.2 No. 950 with D3
EMC FCC part 15 subpart B class B
3 - EPSON GT-10000
(USA)
CSA C108.8 class B (Canada)
230 V
Safety standards:
CE marking
Low Voltage
Directive
73/23/EEC:
EMC Directive
89/336/EEC:
SCSI Interface
Interface type:
Functions:
Logic level:
Electrical standard: ANSI X3T9.2/375R Revision 10L
ID Setting:
Terminator:
1/00
EN 60950 (VDE)
EMC EN 55022 (CISPR Pub 22) class B
AS/NZS 3548 class B
EN60950
EN 55022 Class B
EN 61000-3-2
EN 61000-3-3
EN 50082-1
IEC 801-2
IEC 801-3
IEC 801-4
ANSI X3T9.2/375R Revision 10L
(SCSI II)
BUS FREE phase
ARBITRATION phase
SELECTION/RESELECTION phase
COMMAND phase
(the Logical Unit Number is fixed at 0 and
the Command Link Function
is not supported)
DATA phase
DATA IN phase
DATA OUT phase
STATUS phase
MESSAGE phase
MESSAGE IN phase
MESSAGE OUT phase
ATTENTION condition
RESET condition
TTL compatible
(SCSI II)
Selectable from 0 to 7 (factory setting: 2)
Internal terminator selectable (enable/
disable)