Cisco MCS-78 Series Lista de códigos de erro - Página 6
Procurar online ou descarregar pdf Lista de códigos de erro para Servidor Cisco MCS-78 Series. Cisco MCS-78 Series 13 páginas. Media convergence server
Imprimir páginaCisco - Cisco MCS-78XX Boot Error Codes
215 - Processor Power Module
has lost Redundancy
in Socket x
216 - Voltage Regulator Module
for Processor x
no longer redundant.
216 - Processor PPM has
lost Redundancy Module X
218 - Cache Accelerators
Not Installed.
System Halted.
219 - Tag Update Rules
SRAM Failure.
System Halted
219 - Snoop Rules SRAM Failure.
System Halted
220 - Cache Accelerator
Slot x initialization Failed.
System Halted.
221 - Power Fault On
Processor Bus X
301 - Keyboard Error
301- Keyboard Error or Test
Fixture Installed
http://kbase.cisco.com/paws/servlet/ViewFile/12138/mcs_boot.xml?convertPaths=1
(Processor
Power
Module)
None
(DC-DC
Converter)
has lost
redundancy.
Redundancy
None
failed in
PPM.
Indicated
PPM (DC-
DC
None
Converter)
has lost
redundancy.
Cache
Accelerators
None
not installed
or improperly
installed.
Catastrophic
None
chipset
failure.
Catastrophic
None
chipset
failure.
Cache
Accelerator
in slot x
None
improperly
installed or
bad.
A PPM on
indicated bus
None
is in a failed
state.
Keyboard
None
failure.
Keyboard
None
failure.
Run
Diagnostics.
Replace failed
assembly as
indicated.
Replace the
PPM to restore
redundancy.
Replace failed
assembly as
indicated.
Check the
Cache
Accelerator
installation.
Call the
Compaq
service
provider.
Call Compaq
service
provider.
Check Cache
Accelerator
installation and
if properly
installed,
replace.
Run
Diagnostics.
Replace failed
assembly as
indicated.
Turn off the
computer, then
reconnect the
keyboard.
Replace the
keyboard.
Page 6 of 13
10/2/2008