Cisco ONS 15454 SDH E1-75 Manual de referência - Página 17
Procurar online ou descarregar pdf Manual de referência para Servidor Cisco ONS 15454 SDH E1-75. Cisco ONS 15454 SDH E1-75 22 páginas. Impedance conversion panel
Também para Cisco ONS 15454 SDH E1-75: Manual de referência rápida (16 páginas), Manual (40 páginas), Instalação (13 páginas)
Imprimir página
Chapter 1
Shelf and FMEC Hardware
1.13 Cards and Slots
ONS 15454 SDH cards have electrical plugs at the back that plug into electrical connectors on the shelf
assembly backplane. When the ejectors are fully closed, the card plugs into the assembly backplane
Figure 1-11
Figure 1-11 Installing Cards in the ONS 15454 SDH
1.13.1 Card Slot Requirements
The ONS 15454 SDH shelf assembly has 17 card slots numbered sequentially from left to right. Slots 1
through 6 and 12 through 17 are for traffic-bearing cards.
Slots 7 and 11 are dedicated to TCC2 cards. Slots 8 and 10 are dedicated to cross-connect
(XC-VXL-2.5G, XC-VXL-10G, XC10G) cards. Slot 9 is reserved for the optional AIC-I card. Slots 3
and 15 can also host protect cards that are used in 1:N protection.
Do not operate the ONS 15454 SDH with a single TCC2 card or a single
Caution
XC-VXL-2.5G/XC-VXL-10G/XC10G card installed. Always operate the shelf assembly with one
working and one protect card of the same type.
April 2008
shows card installation.
F A N
F A IL
C R
IT
M A
J
M IN
Guide rail
Ejector
Cisco ONS 15454 SDH Reference Manual, R4.6
1.13 Cards and Slots
1-17