Cisco UCS Manual do utilizador - Página 18

Procurar online ou descarregar pdf Manual do utilizador para Servidor Cisco UCS. Cisco UCS 50 páginas. C-series

Imprimir página

UCS-SCU GUI Home Page

Table 3-3

Toolbar Icon

This section describes the toolbar elements in more detail:

•

Configuring a Network

To configure a network, follow these steps:

Step 1

Click the Network Configuration button on the toolbar.

The Network Configuration dialog box appears.

Step 2

In the Network Configuration dialog box, do the following:

Cisco UCS Server Configuration Utility, Release 5.0

3-4

Toolbar Elements (continued)

Name

Save Logs

Refresh

Reboot

Configuring a Network, page 3-4

Performing Server Health Check, page 3-5

Saving Logs, page 3-5

Select IP Address from DHCP server or Static IP Address. If you select Static IP Address, do the

following:

–

In the IP Address field, enter the IPv4 address.

–

In the Subnet Mask field, enter the subnet IPv4 address.

–

In the Gateway field, enter the gateway IPv4 address.

–

(Optional) In the DNS field, enter the DNS IPv4 address.

Note

Go to Step

if you want to download software and drivers from cisco.com.

Select Direct Connection to internet or Manual Proxy. If you select Manual Proxy, do the following:

–

In the HTTP Proxy Server URL field, enter the URL of the proxy server. The maximum limit is

45 characters.

–

In the Port field, enter the port number. The maximum limit is 5 characters. By default, it is

8080.

Chapter 3

Understanding UCS Server Configuration Utility User Interface

Function

Saves logs to an USB.

Refreshes the content area, if supported.

Reboots the server.

•

Rebooting the Server, page 3-5