Cisco UCS 5100 Configuração

Procurar online ou descarregar pdf Configuração para Servidor Cisco UCS 5100. Cisco UCS 5100 4 páginas. Uplink ethernet connection
Também para Cisco UCS 5100: Configuração (17 páginas), Manual de Firmware (10 páginas), Configuração (5 páginas), Manual (14 páginas), Instruções de atualização (10 páginas), Manual de início rápido (8 páginas), Manual de configuração (6 páginas)

Imprimir página
Cisco UCS 5100 Configuração
Set up Syslog for Cisco UCS
Document ID: 110265
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Configure
Network Diagram
Steps to Configure Syslog to a Local File
Steps to Configure Syslog to a Remote Syslog Server
Verify
Troubleshoot
Related Information
Introduction
Cisco Unified Computing System (UCS) provides several diagnostic tools to aid in troubleshooting and
monitoring the environment. These tools include: command line debug statements, syslog, and SNMP (Call
home is another diagnostic/reporting tool). Syslog is the mechanism for processes and scripts to write log
entries. The callers can fully specify all of the log entries' characteristics.
A syslog daemon in the system captures logs and saves them in a rotating buffer. These logs can be viewed
internally or exported to syslog collectors. Multiple syslog collectors can be specified through configuration.
Prerequisites
Requirements
Cisco recommends that you:
•
Have a working knowledge of Cisco UCS Server Blade software and hardware.
•
Be familiar with the UCS Manager application.
•
Understand the impact and implications of the different commands described in this document.
•
Be familiar with the UCS components and topology. Refer to the diagram below for a typical
solution.
Components Used
The information in this document is based on Cisco UCS System.
Conventions
Refer to the Cisco Technical Tips Conventions for more information on document conventions.