finder 7E.12.8.230.0001 Manual de instruções de montagem e funcionamento - Página 6

Procurar online ou descarregar pdf Manual de instruções de montagem e funcionamento para Instrumentos de medição finder 7E.12.8.230.0001. finder 7E.12.8.230.0001 12 páginas. 20/32 a-active-energy meter, single-phase

Imprimir página

1. Montage

Assembly and operating instructions Type 7E.12/13

20/32 A-active-energy meter, single-phase, Fig. 1

Description

The 7E.12/13 is a space-saving, modern, electronic

single-phase active-energy meter, of accuracy class 1

(according to EN 62053-21), class B respectively (ac-

cording to EN 50470-1). The tamper-proof energy meter

is fitted with a high-quality counting mechanism and can

be mounted on a 35 mm rail regardless of location. The

counting mechanism is fitted with a reverse lock and can

be read at any time even without power supply.

Technical data

Connection

Fig. 2

■

diagram

Dimensions

Fig. 3

■

Characteristics

Single-phase, direct connection

■

meter

Class 1 according EN62053-21,

■

Class B according EN50470-1

PTB approval (Germany) and

■

MID approval (EU and Switzerland)

S0+/S0- output with 1000 Imp/

■

kWh (optional 2000)

Nominal current strength I

■

Maximum current strength

■

max

Starting current value I

■

Assembly

On 35 mm rail (EN 60715TH35)

■

Counting

0...999,999.9

■

mech. capacity

Display

Mechanical, 4 mm figures,

■

decimal point red

Nominal voltage

230 VAC; 50 Hz; P < 0.4 W

■

LED status display

flashing (red)

■

Normal operation 2000 Imp/kWh

■

(imp pause: 100 ms)

4 319 5045 0b

= 5A

= 20/32 A

= 20mA

Instantanneous power:

in kW = Number of imp. per

min x 0.03

No consumption, no impulses

Low consumption

High consumption

Output connection defective

Is displayed at a consumption

> 0.15 A Impulse length 600

ms, pause length 600 ms

Connections ↑L and ↓L must be

exchanged

10.2008

Notes before connecting

1. Do not connect L1, L2 to L3 to N.

2. In order to avoid moisture in the meter due to

condensate build-up, acclimatise the meter at room

temperature for about half an hour before connect-

ing

Assembly note

The energy meter can be mounted onto a 35 mm rail

(EN 60715TH35). It may only be installed and used

in installation cupboards with protection type IP 51

(protected against penetrating dust and dripping water).

EC declaration of conformity

Finder SpA declares at its own responsibility:

The following energy meters are in compliance:

7E.12.8.230.0001

●

7E.13.8.230.0000

●

7E.13.8.230.0000N S0 = 2000 Imp/kWh, 32 A

●

7E.13.8.230.0010

●

7E.13.8.230.0010N S0 = 2000 Imp/kWh, 32 A

●

The following energy meters are approved for energy

billing to third parties

7E.13.8.230.0010

●

7E.13.8.230.0010N S0 = 2000 Imp/kWh, 32A

●

Additionally they meet the following standards or

normative documents

EN 50470 parts 1 and 3 (electronic meters)

●

Directive 2004/22/EC (MID) of the European

●

Parliament and Council on measuring devices

Appendix I, basic requirements

●

Appendix MI-003, electricity meters for kilowatt

●

hours

For year of issue of declaration of conformity according

to Directive 2004/22/EC see printed text on the

device.

Example: Declaration of conformity for 2007

FINDER SpA

Via Drubiaglio, 14

10040 Almese (TO) - ITALY

Subject to change without notice

Englisch

S0 = 1000 Imp/kWh, 20 A

S0 = 1000 Imp/kWh, 32 A

S0 = 1000 Imp/kWh, 32A