B2 Audio Zero1 Manual do Proprietário - Página 5

Procurar online ou descarregar pdf Manual do Proprietário para Amplificador para automóvel B2 Audio Zero1. B2 Audio Zero1 10 páginas.

2. Panel layout

Zero1

GND (GROUND CONNECTION)

For connection to the chassis' ground.

For optimum performance 0 gauge cable is

required, all of them using common ground

connected with cable of equal length.

REM (REMOTE)

Connect to switched +12V from the head unit.

Installation of the amplifier should be done in the folling steps:

1. Ensure that the ground is appropriate, then connect it to the amplifier.

2. Next step is to connect the +12V wire. Ensure all power terminals are used.

3. The final step is connecting the switched remote.

4. Operation over 15V will cause the amplifier to go into protect mode.

This cable has to be fused at the battery & the amplifier for safety precautions.

+12V (POWER CONNECTION)

For connection to the positive terminal

of the battery (+12V).

For optimum performance 0 gauge cable

is required.

CAUTION