Cisco UCS B200 Nota de instalação e manutenção - Página 27
Procurar online ou descarregar pdf Nota de instalação e manutenção para Servidor Cisco UCS B200. Cisco UCS B200 31 páginas. Blade server
Também para Cisco UCS B200: Ficha de dados (8 páginas)
Imprimir página
S e n d d o c u m e n t c o m m e n t s t o u c s - d o c f e e d b a c k @ c i s c o . c o m
Installing an Adapter Card
The network adapters and interface cards all have a shared installation process. The following options
are available:
Table 8
Cisco Product ID
N20-AI0002
N20-AQ0002 or
N20-AE0002
N20-AC0002
N20-AB0002
N20-AI0102
N20-AQ0102
N20-AE0102
UCS-VIC-M82-8P
1. Requires UCS Manager 1.3(1) or later.
2. Requires UCS Manager 2.0(2) or later.
If you are switching from one type of adapter card to another, before you physically perform the switch
make sure you have downloaded the latest device drivers and loaded them into the server's operating
system. For more information refer to the firmware management chapter of one of the UCS Manager
software configuration guides.
To install an adapter card on the blade server, follow these steps:
Position the adapter board connector above the mother board connector and align the three adapter
Step 1
captive screws to the posts on the motherboard.
Firmly press the adapter connector into the motherboard connector.
Step 2
Tighten the three captive screws.
Step 3
OL-22473-02
Adapter Card Options
Name
Cisco UCS 82598KR-CI 10 Gb Ethernet Adapter
Cisco UCS M71KR-E/Q Converged Network Adapter
Cisco UCS M81KR Virtual Interface Card
Cisco UCS NIC M51KR-B Broadcom BCM57711 Network Adapter
Cisco UCS CNA M61KR-I Intel Converged Network Adapter
Cisco UCS CNA M72KR-Q QLogic Converged Network Adapter
Cisco UCS CNA M72KR-E Emulex Converged Network Adapter
Cisco UCS Virtual Interface Card 1280
2
Cisco UCS B200 Blade Server Installation and Service Note
Removing a Blade Server Cover
1
1
1
1
27