Cisco UCS B200 M4 Nota de instalação e manutenção - Página 11
Procurar online ou descarregar pdf Nota de instalação e manutenção para Servidor Cisco UCS B200 M4. Cisco UCS B200 M4 46 páginas. For e5-2600 v4 series cpus
Também para Cisco UCS B200 M4: Nota de instalação e manutenção (30 páginas), Upgrade Manual (9 páginas), Manual de manutenção (24 páginas)
Imprimir página
Overview
Table 1: Blade Server LEDs
LED
Power
Link
Health
Blue locator button and LED
Activity
(Disk Drive)
Color
Description
Off
Power off.
Green
Main power state. Power is supplied to all server
components in normal operation.
Amber
Standby power state. Power is supplied only to the service
processor of the server so that the server can still be
managed.
If you press and release the front-panel power
Note
button, the server performs an orderly shutdown
of the 12 V main power and goes to standby
power state. You cannot shut down standby power
from the front-panel power button. See the Cisco
UCS Manager Configuration Guide for
information about completely powering off the
server from the software interface.
Off
None of the network links are up.
Green
At least one network link is up.
Off
Power off.
Green
Normal operation.
Amber
Minor error.
Blinking Amber
Critical error.
Off
Blinking is not enabled.
Blinking blue 1
Blinking to locate a selected blade—If the LED is not
Hz
blinking, the blade is not selected. You can control the
blinking in UCS Manager or by using the blue locator
button/LED.
Off
Inactive.
Green
Outstanding I/O to disk drive.
Flashing Green
Rebuild in progress. Health LED will flash in unison.
4 Hz
Flashing Green
Identify drive active.
4 hz
Cisco UCS B200 M4 Blade Server Installation and Service Note
LEDs
3