Cisco UCS B22 M3 Nota de instalação e manutenção - Página 25
Procurar online ou descarregar pdf Nota de instalação e manutenção para Servidor Cisco UCS B22 M3. Cisco UCS B22 M3 31 páginas. Blade server
Também para Cisco UCS B22 M3: Upgrade Manual (21 páginas)
Imprimir página
Tip
To remove a VIC, reverse the above procedure. You might find it helpful when removing the connector from the
motherboard to gently rock the board along the length of the connector until it loosens.
Figure 18: Installing an mLOM Adapter
Installing an Adapter Card
All the supported mezzanine cards have a common installation process. These cards are updated frequently. Currently supported
cards and the available models for this server are listed in the specification sheets at this URL:
servers-unified-computing/ucs-b-series-blade-servers/datasheet-listing.html
If you are switching from one type of adapter card to another, before you physically perform the switch make sure that you download
the latest device drivers and load them into the server's operating system. For more information, see the firmware management chapter
of one of the Cisco UCS Manager software configuration guides.
Procedure
Step 1
Position the adapter board connector above the motherboard connector and align the two adapter captive screws to the
standoff posts (see callout 1) on the motherboard.
Step 2
Firmly press the adapter connector into the motherboard connector (see callout 2).
Step 3
Tighten the two captive screws (see callout 3).
http://www.cisco.com/c/en/us/products/
25