Cisco UCS B260 M4 Nota de instalação e manutenção - Página 44
Procurar online ou descarregar pdf Nota de instalação e manutenção para Servidor Cisco UCS B260 M4. Cisco UCS B260 M4 50 páginas. Blade server
Também para Cisco UCS B260 M4: Nota de instalação e manutenção (46 páginas)
Imprimir página
Installing and Enabling a Trusted Platform Module
b) On the Advanced tab, select Trusted Computing and press Enter to open the TPM Security Device
Configuration window.
c) Set the TPM State option to Enabled.
d) Press F10 to save and exit. Allow the server to reboot, but watch for the prompt to press F2 in the next
step.
Step 4
Verify that TPM Support and TPM State are enabled.
a) Press F2 during reboot to enter the BIOS setup screens.
b) On the Advanced tab, select Trusted Computing and press Enter to open the TPM Security Device
Configuration window.
c) Verify that TPM Support and TPM State are set to Enabled.
d) Continue with enabling the Intel TXT feature in the next step.
Step 5
Enable the Intel TXT feature in the BIOS.
a) Choose the Advanced tab.
b) Choose Intel TXT (LT-SX) Configuration to open the Intel TXT (LT-SX) Hardware Support window.
c) Set TXT Support to Enabled.
d) Verify that the following items are listed as Enabled:
• VT Support (default is Enabled)
• VT-d Support (default is Enabled)
• TPM Support
• TPM State
If VT Support and VT-d Support are not enabled, return to the Advanced tab, select Processor
Configuration, and then set Intel (R) VT and Intel (R) VT-d to Enabled.
e) Press F10 to save and exit.
Cisco UCS B260 M4 and B460 M4 Blade Server Installation and Service Note for Servers with E7 v3 and E7 v2 CPUs
36
Servicing the Blade Server