Cisco UCS B440-M1 Configuração
Procurar online ou descarregar pdf Configuração para Servidor Cisco UCS B440-M1. Cisco UCS B440-M1 8 páginas. Bios policy configuring
Também para Cisco UCS B440-M1: Manual (12 páginas)
Imprimir páginaConfigure BIOS Policy for Cisco UCS
Document ID: 112034
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Background Information
Configure
Network Diagram
BIOS Policy Configuration
Create a BIOS Policy
Associate the BIOS Policy to a Service Profile
Troubleshoot
Related Information
Introduction
This document explains how to configure the BIOS policy in Cisco UCS manager. The BIOS policy feature in
Cisco UCS automates the BIOS configuration process.
The traditional method of setting the BIOS is manual and often error−prone. By creating a BIOS policy and
assigning the policy to a server or group of servers, you have the transparency in BIOS settings and
configuration.
Prerequisites
Requirements
Cisco recommends that you:
•
Have a working knowledge of Cisco UCS Server Blade software and hardware.
•
Be familiar with Cisco UCS components and topology.
•
Be familiar with Cisco UCS Manager version 1.3.
Components Used
The information in this document is based on these software and hardware versions:
•
Cisco UCS B440−M1 Blade Server
•
Cisco UCS Manager version 1.3
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.