Cisco UCS B460 M4 Nota de instalação e manutenção - Página 38

Procurar online ou descarregar pdf Nota de instalação e manutenção para Servidor Cisco UCS B460 M4. Cisco UCS B460 M4 46 páginas. Blade server
Também para Cisco UCS B460 M4: Ficha de dados (7 páginas), Manual de início rápido (2 páginas), Manual de início rápido (5 páginas), Nota de instalação e manutenção (50 páginas)

Enabling the Trusted Platform Module

URL:

datasheet-listing.html

If you are switching from one type of adapter card to another, before you physically perform the switch make

sure that you download the latest device drivers and load them into the server's operating system. For more

information, see the firmware management chapter of one of the Cisco UCS Manager software configuration

guides.

Figure 23: Installing an Adapter Card

Procedure

Step 1

Position the adapter board connector above the motherboard connector and align the two adapter captive

screws to the standoff posts (see callout 1) on the motherboard.

Step 2

Firmly press the adapter connector into the motherboard connector (see callout 2).

Step 3

Tighten the two captive screws (see callout 3).

Tip

The Trusted Platform Module (TPM) is a component that can securely store artifacts used to authenticate the

server. These artifacts can include passwords, certificates, or encryption keys. A TPM can also be used to

store platform measurements that help ensure that the platform remains trustworthy. Authentication (ensuring

that the platform can prove that it is what it claims to be) and attestation (a process helping to prove that a

platform is trustworthy and has not been breached) are necessary steps to ensure safer computing in all

environments. It is a requirement for the Intel Trusted Execution Technology (TXT) security feature, which

must be enabled in the BIOS settings for a server equipped with a TPM.

Cisco UCS B260 M4 and B460 M4 Blade Server Installation and Service Note for Servers with E7 v4 CPUs

http://www.cisco.com/c/en/us/products/servers-unified-computing/ucs-b-series-blade-servers/

Removing an adapter card is the reverse of installing it. You might find it helpful when removing the

connector from the motherboard to gently rock the board along the length of the connector until it

loosens.

Servicing the Blade Server