Cisco UCS C220 Manual de início rápido - Página 8
Procurar online ou descarregar pdf Manual de início rápido para Servidor Cisco UCS C220. Cisco UCS C220 17 páginas. Connected safety and security (css)
Também para Cisco UCS C220: Manual de instalação e serviço (4 páginas), Manual do utilizador (22 páginas)
Imprimir página
Completing the Initial Configuration
Log in to the Content Server Windows Server Manager by using the default password, Cisco123.
Step 1
Go to Start > Control Panel > User Accounts > Change your Windows password > Change your
Step 2
password.
In the Change your password window, enter the current password (Cisco123), the new password, and
Step 3
confirm the new password.
Click Change password.
Step 4
Click OK.
Step 5
Task 3: Enter the Windows Server 2012 activation key
The Windows Server 2012 Physical Key is on the printed label on the Content Server top near the front.
You should have an Internet connection to access the Windows Server 2012 online activation service.
Follow these steps:
Connect the Content Server to your network. Use an Ethernet cable to connect from your LAN to the
Step 1
LAN1 network port, marked with blue in
for your CIMC management connection.
Figure 4
Step 2
Log in to the Content Server Windows Server Manager by using the password that you set in
the local administrator
Step 3
Go to Start > Administrative Tools > Server Manager. In the Server Manager window, click Activate
Windows. Enter the Physical Key (located on the Content Server chassis label). Click Next.
If the Content Server is not connected to the Internet, you can follow the on-screen instructions to
activate Windows Server 2012 by using your phone.
When the product key is verified and activated, click Close.
Step 4
Cisco TelePresence Content Server Release 7.0 Quick Start Guide
8
Figure
Network Connections
password.
4, on the rear panel. Use the connector marked with red
Task 2: Set