Epson GT-10000 Manual de informações do produto - Página 5
Procurar online ou descarregar pdf Manual de informações do produto para Scanner Epson GT-10000. Epson GT-10000 9 páginas. Product support bulletin(s)
Também para Epson GT-10000: Especificações (2 páginas), Manual de informações do produto (8 páginas), Brochura e especificações (2 páginas), Manual do utilizador (8 páginas), Boletim de apoio ao produto (12 páginas)
Imprimir página
EPSON GT-10000+
Environmental
Temperature:
Operating: 41 to 95 °F (5 to 35 °C)
Standby: 13 to 140 °F ( 25 to 60 °C)
Humidity (without
condensation):
Operating: 10 to 80%
Standby: 10 to 85%
Connector pin assignments
Pin number
Signal name
1
VP
2
VG
3
TPB
4
TPB
5
TPA
6
TPA
Lights and Buttons
The scanner has three indicator lights and two buttons on its
control panel. A ] Start button is located beside the document
table. Light status and button functions are described in the
tables that follow.
ERROR
light
4 - EPSON GT-10000+
Function
Cable power supply
Cable ground
Strobe during receipt, data during
transmission (differential pair)
Data during receipt, strobe
during transmission (differential
pair)
RESET button
OPERATE button
OPERATE
light
READY
light
Scanner indicator lights
Light
Light status
OPERATE
On
READY
On
Flashing
ERROR
On
Flashing
Scanner buttons
Button
Function
P
OPERATE
Turns the scanner on and off.
RESET
Initializes the scanner.
Automatically launches a
]
Start
application. You must set up your scanner software
and a compatible application to use this feature with
any application other than Presto! PageManager.
If you installed Presto! PageManager, it's
automatically assigned to the
set up Presto! PageManager to scan your image
automatically and send it directly to another application
or a peripheral device, such as a printer.
Error conditions
ERROR light
READY light
On
On
Flashing
Off
Flashing
Flashing
Off
Off
3/01
Color
Scanner status
Green
Scanner is on.
Green
Ready to scan images.
Scanning in progress.
Red
An error has occurred.
See Error conditions
table below.
]
Start button-compatible
]
Start button. You can
Error type
Command error: The scanner has
received incorrect commands from
the scanning software. Try rescanning.
Interface error: Make sure the scanner
is securely connected to the
computer, and then turn the scanner
off and back on again.
Fatal error: Make sure the
transportation lock is released, and
then turn the scanner off and back on
again.
Option error: There's a problem with
the ADF unit. Make sure the ADF is
flat against the document table. Make
sure it is securely connected to the
ADF connector at the back of the
scanner. Finally, make sure the ADF
isn't out of paper and doesn't have a
paper jam.