B3 innovations Pico Manual - Página 2
Procurar online ou descarregar pdf Manual para Impressoras 3D B3 innovations Pico. B3 innovations Pico 12 páginas.
Imprimir página
Table of Contents
Mounting Pico hot-end . . . . . . . . . . . . . . . . . . . . . . . . 1
Fan Position | Specs | Shroud . . . . . . . . . . . . . . . . . . . 2
Setting Z-Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Ensure Proper Alignment with Extruder . . . . . . . . . . . . 3
Starting a Print . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Material Printing Temperatures . . . . . . . . . . . . . . . . . . 4
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Setup Notes
Use Marlin Thermistor Table No. 1 for the 300°C
n
(100K Thermistor)
Download the B3 500 Celsius Thermistor Table for
n
the 500 Celsius Thermistor from the Downloads page
on B3innovations.com
Before printing with Pico, tighten nozzle while Pico
n
is at 250°C. Note: an intended small gap will be
present. See Page 5 for further explanation
B3 highly recommends the use of
n
the included filament filter to remove
particulates from the surface of the filament
before entering the extruder. A few drops of
vegetable oil on the filter media will further
reduce the likelihood of jams for PLA.
Two cylindrical foam filters are provided for your convenience.
Use one for dry use and one for lubricated use.