Cisco 450 Manual de instalação do hardware - Página 27

Procurar online ou descarregar pdf Manual de instalação do hardware para Porta de entrada Cisco 450. Cisco 450 37 páginas. Voice gateway

Powering On the Cisco VG450 Voice Gateway

To power on your Cisco VG450 Voice Gateway, perform the following tasks in the order listed, as required:

•

Checklist for Power-On

You can power on a Cisco VG450 Voice Gateway if it meets the requirements described in Chapter 3: Installing

the Cisco VG450 Voice Gateway.

• The chassis is securely mounted.

• Power cable is connected.

• Interface cables are connected.

Perform this procedure to power on your Cisco VG450 Voice Gateway, and verify that it goes through its

initialization and self-test. When this is finished, the Cisco VG450 Voice Gateway is ready to configure.

Danger

This unit might have more than one power supply connection. All connections must be removed to de-energize

the unit. Statement 1028

Danger

Installation of the equipment must comply with local and national electrical codes. Statement 1074

To power on the Cisco VG450 Voice Gateway, perform the following:

SUMMARY STEPS

1. Power on your terminal or PC, and configure it for 9600 bps, 8 data bits, 1 stop bit, and no parity.

Checklist for Power-On, on page 25

Power-On Procedure, on page 25

Troubleshooting, on page 27

C H A P T E R

Cisco 450 Voice Gateway Hardware Installation Guide