Cisco AS5400XM Manual de instalação - Página 13

Procurar online ou descarregar pdf Manual de instalação para Porta de entrada Cisco AS5400XM. Cisco AS5400XM 16 páginas.

Chapter 3

Installing the Cisco AS5400XM Universal Gateway

The device is designed to work with TN power systems. Statement 19

Warning

Connecting the AC Power Cord

To connect the power cord, follow these steps:

Connect one end of each power cord to the power connectors on the rear panel. (See

Step 1

Figure 3-14

Latch the clips provided on the power supply of the chassis to each power cord.

Step 2

Connect the other end of the power cords to the power outlets.

Step 3

Warning

The plug-socket combination must be accessible at all times, because it serves as the main

disconnecting device. Statement 1019

Power up the Cisco AS5400XM universal gateway.

Step 4

The internal power supply fan should power up.

Wiring the DC Power Supply

If you ordered the Cisco AS5400XM universal gateway with a DC power supply, follow the procedure

in this section to wire the terminal block.

Note

The grounding architecture for the Cisco AS5400XM universal gateway is isolated DC return (DC-I).

OL-6418-02

Connecting the AC Power Cord

Cisco AS5400XM Universal Gateway Chassis Installation Guide

Supplying Power

Figure

3-14.)

Power switch

3-13