Cisco ASR 9000 Series Configuração - Página 16
Procurar online ou descarregar pdf Configuração para Porta de entrada Cisco ASR 9000 Series. Cisco ASR 9000 Series 46 páginas. Line card
Também para Cisco ASR 9000 Series: Configuração das definições de rede (26 páginas), Manual de configuração (46 páginas), Manual de configuração (50 páginas), Manual (24 páginas), Manual (44 páginas), Manual de referência rápida (7 páginas)
Imprimir página
How to Configure Channelized SONET/SDH
Command or Action
Step 21
end
or
commit
Example:
RP/0/0RSP0/CPU0:router(config-sonet)# end
or
RP/0/RSP0/CPU0:router(config-sonet)#
commit
Step 22
show controllers sonet interface-path-id
Example:
RP/0/RSP0/CPU0:router# show controllers
sonet 0/1/1/0
Configuring Packet over SONET Channels
This task explains how to configure Packet over SONET (POS) channels on SPAs supporting
channelized SONET.
Prerequisites
You have one of the following SPAs installed:
•
•
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
Cisco ASR 9000 Aggregation Services Router Interfaces and Hardware Component Configuration Guide
HC-332
Cisco 1-Port Channelized OC-48/STM-16 SPA
Cisco 2-Port Channelized OC-12/DS0 SPA
configure
controller sonet interface-path-id
clock source {internal | line}
framing {sdh | sonet}
sts number
width number
Configuring Channelized SONET/SDH on the Cisco ASR 9000 Series Router
Purpose
Saves configuration changes.
•
When you issue the end command, the system prompts you to
commit changes:
Uncommitted changes found, commit them before
exiting(yes/no/cancel)?
[cancel]:
–
Entering yes saves configuration changes to the running
configuration file, exits the configuration session, and
returns the router to EXEC mode.
Entering no exits the configuration session and returns the
–
router to EXEC mode without committing the
configuration changes.
Entering cancel leaves the router in the current
–
configuration session without exiting or committing the
configuration changes.
Use the commit command to save the configuration changes to
•
the running configuration file and remain within the
configuration session.
Verifies the SONET controller configuration.
OL-26061-03