Cisco ASR 9000 Series Configuração - Página 41
Procurar online ou descarregar pdf Configuração para Porta de entrada Cisco ASR 9000 Series. Cisco ASR 9000 Series 46 páginas. Line card
Também para Cisco ASR 9000 Series: Configuração das definições de rede (26 páginas), Manual de configuração (46 páginas), Manual de configuração (50 páginas), Manual (24 páginas), Manual (44 páginas), Manual de referência rápida (7 páginas)
Configuring Channelized SONET/SDH on the Cisco ASR 9000 Series Router
mode c11-t1
width 1
root
controller T1 0/1/1/0/0/1/1
channel-group 0
timeslots 1-12
show configuration
root
interface serial 0/1/1/0/1/1:0
encapsulation ppp
ip address 10.10.10.10 255.255.255.255
no shutdown
commit
show controllers sonet 0/1/1/0
Channelized SDH AU-3 to TUG-2, VC-12, E1 and NxDS0s: Example
This example is not supported on the 1-Port Channelized OC-48/STM-16 SPA.
Note
The following example shows how to configure SDH AU-3 to TUG-2, VC-12 and channelized E1 to
NxDS0s:
configure
controller sonet 0/1/1/0
clock source internal
framing sdh
au 1
mode c12-e1
width 1
root
controller e1 0/1/1/0/0/1/1
channel-group 0
timeslots 1-12
show configuration
root
interface serial 0/1/1/0/1/1:0
encapsulation ppp
ip address 10.10.10.10 255.255.255.255
no shutdown
commit
show controllers sonet 0/1/1/0
Channelized SDH AU-4 Configuration: Examples
This section includes the following configuration examples:
•
•
Channelized SDH AU-4 to TUG-3 and Clear Channel T3/E3: Examples
The following exampe shows SDH AU-4 channelization to TUG-3 and clear channel T3:
configure
controller sonet 0/4/0/0
framing sdh
au 1
width 3
OL-26061-03
Channelized SDH AU-4 to TUG-3 and Clear Channel T3/E3: Examples, page 357
Channelized SDH AU-4 to TUG-3, TUG-2, and T1/E1 and NxDS0: Examples, page 358
Cisco ASR 9000 Aggregation Services Router Interfaces and Hardware Component Configuration Guide
Configuration Examples for Channelized SONET
HC-357