Cisco Firepower 1600 Manual de instalação do hardware - Página 6
Procurar online ou descarregar pdf Manual de instalação do hardware para Porta de entrada Cisco Firepower 1600. Cisco Firepower 1600 44 páginas.
Imprimir página
Features
Table 1: FMC 1600, 2600, and 4600 Features
Feature
Form factor
Rack mount
Airflow
Pullout asset card
Flex flash card
Grounding hole
Locator beacon
Power switch
Processor
Memory
RDIMMs
Internal component only;
not field-replaceable
Management ports
USB ports
VGA port
SFP ports
Supported SFP+
Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide
2
1600
2600
1 RU
Yes
Standard 19-in. (48.3 cm) 4-post EIA rack
Front to rear
Cold aisle to hot aisle
Displays the serial number and the MAC address for the two built-in management
ports.
32 GB (for vMedia)
Internal component only; not field-replaceable
Yes
Two threaded holes for dual-hole grounding lug
Use is optional; the supported AC power supplies have internal grounding, so
no additional chassis grounding is required.
Yes
Yes
One Intel Xeon 4110
Two Intel Xeon 4110
processor
processors
32-GB RAM
64-GB RAM
Two 16-GB
Four 16-GB
DDR4-2400-MHz
DDR4-2400-MHz
DIMMs
DIMMs
Two built-in RJ-45 SFP+ ports
Support for 1000 Mbps, 1 Gbps, and 10 Gbps
The primary management port is eth0. You can use eth1, eth2, and eth3 as
secondary management or event ports.
Two
USB 3.0 Type A
One 3-row 15-pin DB-15 connector
Enabled by default
Two fixed SFP+ ports
SFP-10G-SR (10 GB)
Overview
4600
Two Intel Xeon 4116
processors
128-GB RAM
Eight 16-GB
DDR4-2400-MHz
DIMMs