Cisco RF Gateway 10 Manual de início rápido - Página 14

Procurar online ou descarregar pdf Manual de início rápido para Porta de entrada Cisco RF Gateway 10. Cisco RF Gateway 10 41 páginas. Cisco systems rf gateway quick start guide

Imprimir página

Figure 9

Positioning the Chassis on the Rack

Step 7

Hold the chassis in position against the mounting rails and follow these steps:

a. Insert a bottom screw into the rack-mount ear on each side and use a hand-held screwdriver to tighten the screw to the

rack rail.

In the next step, insert the top screw diagonally from the bottom screw that you just attached.This helps in keeping the

Tip

chassis in place.

b. Insert a top screw into each side rack-mount bracket and tighten the screw to the rack rail.

c. Insert a minimum of four screws per bracket on both sides of the chassis.

If you are using the chassis installation handles on the front rack-mount brackets, you must first remove the handles to

Note

install the fourth screw.

Ensure that all screws on each side rack-mount brackets are tightened to the equipment rack then the chassis installation

Step 8

brackets can be removed from the rack.

Fan tray

handle