Epson Stylus CX8400 Series Manual de operação - Página 19

Procurar online ou descarregar pdf Manual de operação para Scanner Epson Stylus CX8400 Series. Epson Stylus CX8400 Series 28 páginas. Ink cartridge for use with stylus cx5000; cx6000; cx7400; cx8400; cx9400f; cx9475f printers;
Também para Epson Stylus CX8400 Series: Manual de serviço (20 páginas), Manual rápido (48 páginas), Manual (14 páginas), Brochura e especificações (2 páginas), Manual Iniciar aqui (8 páginas), Atualização (1 páginas), Manual (4 páginas)

Imprimir página

Epson Stylus CX8400 Series Manual de operação

4. Press x Start.

The printer begins cleaning the print

head. Follow the message on the LCD

screen.

c Caution:

Never turn off the printer while head cleaning

is in progress. You may damage it.

5. When cleaning finishes, a message is

displayed on the LCD screen. Press

x Start to print a nozzle check pattern to

check the results (& "Checking the print

head" on page 18).

If there are still gaps or the test patterns

are faint, run another cleaning cycle and

check the nozzles again.

Note:

If you do not see any improvement after

cleaning about four times, turn off the printer

and wait for at least six hours. This lets any

dried ink soften. Then try cleaning the print

head again. If quality still does not improve,

one of the ink cartridges may be old or

damaged and needs to be replaced

(& "Removing and Installing Ink Cartridges"

on page 15).

Aligning the Print Head

If your printouts contain misaligned vertical

lines or horizontal banding, you may be

able to solve this problem by aligning the

print head.

1. Load A4-size plain paper (&

2. Press F [Setup].

3. Select Maintenance, then press OK.

4. Select Head Alignment, then press OK.

5. Press x Start. Four rows of alignment

patterns are printed.

6. Look at pattern #1 and find the patch

that is most evenly printed, with no

noticeable streaks or lines.

7. Select the number for that patch, then

press OK.

8. Enter the numbers for the other patterns

in the same way.

9. When you finish, press OK and you see a

message indicating alignment is

complete.

page 6

Maintenance