Digizoid ZO Manual do utilizador - Página 3

Procurar online ou descarregar pdf Manual do utilizador para Amplificador Digizoid ZO. Digizoid ZO 4 páginas. Personal subwoofer
Também para Digizoid ZO: Manual do produto (13 páginas), Manual Smart Start (6 páginas)

Imprimir página

Control your

Powering On/Oﬀ

To turn your ZO on, push in & release the SVC. When on, the LightScale

indicator will illuminate.

To turn your ZO oﬀ, push in & hold the SVC until the light goes oﬀ.

Changing Contour Level with the SVC

When your ZO is turned on for the ﬁrst time, the SVC will be set at the median

contour level, and the LightScale indicator will illuminate an amber color.

To increase the contour level, rotate the SVC upwards. When the contour level

reaches the maximum setting, the LightScale will transition to red.

To decrease the contour level, rotate the SVC downwards. When the contour

level reaches the minimum setting, the LightScale will transition to green.

Changing Volume Level with the SVC

To switch from Contour adjustment to volume adjustmemt, push in & release

the SVC. When turned on for the ﬁrst time, the volume will be at the median

level, and the LightScale color will change to blue. Volume level will be indicated

by the intensity of blue light. Adjustment of volume level works the same way

as Contour level adjustment.

Standby Mode

When the LightScale is not illuminated, ZO is in standby mode. This directly

connects the audio source to ZO's output. ZO also switches into standby mode

for uninterrupted listening when the battery gets low.

If using Line-Out

Turn ZO on ﬁrst, and set the volume of the ZO at the minimum setting.

Then, adjust the volume accordingly. Also, when using line-out, standby mode

should not be used.

Pg 3

digiZoid.com