Argos Portabase Instruções de montagem - Página 2

Procurar online ou descarregar pdf Instruções de montagem para Mobiliário de interior Argos Portabase. Argos Portabase 4 páginas.

Assembly: Only for Groundsman

Step 1

Identify the 2 long beams

and the remaining shorter

beams.

On a level surface create

the required layout, as

shown. Secure the shorter

beams in place using 2x

100mm screws as shown in

the diagram.

* Important, Ensure that all short beams

are equally spaced.

Step 2

With the portbase in the desired position for the buildings

framework using 3x40mm round head screws pre-drilling

with a 2mm drill bit. Ensure that the base is level. Either of

Pre-Drill with

2mm bit

Step 3

To secure the base to the ground,

hammer in the spikes at each corner

untill level with the top of the base,

using a piece of scrap wood to

prevent damage to the spike.

Step 4

Pre-Drill with

2mm bit

If the Portabase is to be located onto hardstanding, only the L shaped Foot are used. Position the portabase

through the joists lined up with the beams of the Portabse.

On soft ground we would recommend the use of post-mix concrete to secure the corner spikes.

N.B The building must be erected on the portabase as it cannot be moved once erected.

Once the Spike is in the desired

round head screws as shown. Pre-drill

using a 2mm drill bit.