DIGMESA FC Manual do utilizador - Página 8

Procurar online ou descarregar pdf Manual do utilizador para Controlador DIGMESA FC. DIGMESA FC 12 páginas. Flow controller

4.2

Reset to zero

If you wish to set the counter to zero, GENTL

button on the underside of the housing using the tip of a ball-point pen.

Press the Reset button adequately long (approx. 4 seconds) until the display is

cleared. The zero-reset function will only have been performed when the display

is cleared. As soon as you release the button, value 0.00 and LITRES are shown

on the display.

The device stores the values of the last 24 resets in its internal non-volatile

memory. Proceed as follows in order to retrieve this data:

Press the Reset and Interrogation button as follows: press for 1 second, release

for one second, press again, after which St St St St St-01

release and the last value set to zero is shown on the display.

If you press Reset a further time, St St St St St-02

lease the button, the value prior to the second last zero reset is displayed etc.

List all of them until you see End

now release, the FC is once again in Working mode.

The litres continue to be counted in the background during the statistics dis- - - - -

The litres continue to be counted in the background during the statistics dis

play

play. If you do not press the button for 30 seconds, the FC automatically

. If you do not press the button for 30 seconds, the FC automatically

returns to Working mode.

returns to W

End

End on the display. Then press a further time. If you

End

orking mode.

Figure 3

Page 8

GENTL

GENTLY Y Y Y Y press the Reset and Interrogation

GENTL

-01 is shown on the display; now

-01

-02

-02 is shown on the display. When you re-

-02

Reset and Interrogation button