Epson C831 Manual do utilizador - Página 5

Procurar online ou descarregar pdf Manual do utilizador para Acessórios para impressoras Epson C831. Epson C831 8 páginas. Longitudinal label slitter

HOW TO ADD OR REMOVE A BLADE HOLDER

Keep out the iron slide bar unscrewing the

thumb screw.

REPLACING SLITTER BLADES

STEP 7

Switch on the Slitter.

Slowly turn the speed knob. Run the

slitter until the labels reach the bottom

of the take-up core holder.

Remove the labels that have rewinded

onto the take-up core holder.

STEP 8

Attach the labels to the core using a

waste label or tape.

Switch on the slitter and slowly turn to

increase the speed.

Now you can start to print.

Slide in or out the blade holder.

Relocate the slide iron bar in its position

and rescrew the thumb screw.

Loosen the two screws holding the blade in

place.

Replace the blade.

Fix back the screw to holding the blade in

place.