Epson CX6400 - Stylus Color Inkjet Manual Iniciar aqui - Página 7

Procurar online ou descarregar pdf Manual Iniciar aqui para Acessórios para impressoras Epson CX6400 - Stylus Color Inkjet. Epson CX6400 - Stylus Color Inkjet 9 páginas. Product support bulletin(s)
Também para Epson CX6400 - Stylus Color Inkjet: Especificações (2 páginas), Manual de informações (4 páginas), Ficha de informação do produto (4 páginas), Informações sobre o produto (14 páginas), Manual Iniciar aqui (8 páginas), Manual de configuração (2 páginas), Atualização (1 páginas), Boletim de apoio ao produto (6 páginas), Boletim de apoio ao produto (1 páginas)

Imprimir página
Epson CX6400 - Stylus Color Inkjet Manual Iniciar aqui
Selecting the Stylus CX for Mac OS X
1
Open the OS X Applications folder,
then open the Utilities folder and
start Print Center or the Printer
Setup Utility.
If you see this screen, click Add.
2
On the Printer List screen, click the Add button.
3
On the next screen, select EPSON USB
from the pull-down menu.
4
Click Stylus CX6400.
Note: If the CX6400 doesn't appear, make
sure it is turned on and securely connected
to you Macintosh.
5
Open the Page Setup pull-down
menu at the bottom of the screen
and select All.
6
Click the Add button. You see
the Printer List again with the
Borderless feature available.
7
Close Print Center. You're ready to
copy, scan, and print.
8
Now start up your Macintosh in OS 9.x. Follow the instructions in the
previous column to install the OS 9.x drivers and optional software for
Macintosh Classic programs.
Selecting the Stylus CX for Mac OS 8.6 to 9.x
1
Open the Chooser from the
Apple menu.
2
Select CX6400, then select your
USB port and turn on background
printing.
3
Close the Chooser. You're ready
to copy, scan, and print.

Any Problems?

If the red
!
error light is on, check the message on the Stylus CX. Try
turning the Stylus CX off and then back on to clear the error. If your problem
is listed here, try these suggestions. For more information, see your Quick
Reference booklet, software Help, or on-screen EPSON Reference Guide.
The Found New Hardware
Wizard appears on
your screen.
You see an error message
when you try to print
or scan.
The Stylus CX
doesn't work.
Click Cancel and follow the steps in
section 6. Disconnect the Stylus CX
before installing the software.
Make sure your Stylus CX is connected to
your computer, plugged into a power
source, and turned on.
Make sure you removed the tape from the ink
cartridge holder, as described in section 1.
Turn the Stylus CX off and then on again.
Make sure the ink cartridges are pushed
all the way down.
Check the LCD screen to see if you or
someone else set the Security Lock. See
your Quick Reference booklet for details.
Make sure your EPSON Stylus CX6400
software is installed correctly.