Epson FX-880+ Manual rápido - Página 20

Procurar online ou descarregar pdf Manual rápido para Acessórios para impressoras Epson FX-880+. Epson FX-880+ 33 páginas. Epson serial impact dot matrix printers
Também para Epson FX-880+: Manual de configuração (33 páginas), Brochura e especificações (24 páginas), Manual (18 páginas), Especificações (2 páginas), Leia isto primeiro (2 páginas), Manual de referência (34 páginas)

Single Sheets with the High-Capacity Cut-Sheet Feeder

The high-capacity cut-sheet feeder holds up

to 150 sheets of paper or up to 25 envelopes.

Note:

It is recommended that you close the flap on the

front cover if paper is not loaded from the front slot.

Follow these steps to load paper in the

high-capacity cut-sheet feeder:

Caution:

Do not load multipart forms, carbon

paper, or labels in the high-capacity

cut-sheet feeder.

1. Set the paper release lever to the

single-sheet position. Also make sure the

paper-thickness lever (located under the

printer cover) is set to 0 if you are using

ordinary single-sheet paper. (If you are

using envelopes, see "Special Papers"

for instructions on setting the

paper-thickness lever.)

Downloaded from:

http://www.usersmanualguide.com/

EPSON FX-880+/FX-1180+ Quick Guide

2. Pull the lock levers on the edge guides

forward to release them.

3. Slide the left paper guide until it is

aligned with the triangle mark; then lock

it in place by pushing back its lock lever.

Next, slide the right paper guide to

roughly match the width of your paper.

Slide the paper support to midway

between the paper guides.

Single Sheets with the High-Capacity Cut-Sheet Feeder (1/2)