TomTom LINK 530 Manual de instalação - Página 21

Procurar online ou descarregar pdf Manual de instalação para Sistema de navegação automóvel TomTom LINK 530. TomTom LINK 530 40 páginas.

Testing operation

In addition to the tests described below you can also test the operation of your LINK 530 using the

TomTom Business Solutions Diagnostic Tool with Bluetooth.

Before testing the connection to power and to the ignition make sure you have properly carried

out the installation.

1. Please check all connections to the LINK 530 (wires, fuses etc.).

2. Turn off the ignition.

The green LED must be off and then flash on every 3 seconds.

3. Turn on the ignition.

The green LED must be on and then go off every 3 seconds. If the device is already activated,

the green

LED must be on all the

If the LED does not perform accordingly, monitor the LEDs for

For this test, you may need to move the vehicle to a location with a clear view of the sky, to make

sure that you have adequate GPS and mobile network reception.

For this test put the LINK 530 in the

1. Turn on the ignition.

2. Monitor the yellow LED. It must be on and go off every 3 seconds.

As soon as the device has established a connection to WEBFLEET the yellow LED stays on all the

time.

If the LED keeps flashing for longer than 10 minutes, monitor the LEDs for

time.

position where you want to fix

diagnostics

it.

diagnostics