Argos VU-01e Manual de instruções - Página 7

Procurar online ou descarregar pdf Manual de instruções para Aspirador de pó Argos VU-01e. Argos VU-01e 8 páginas. Bagless upright vacuum cleaner

Imprimir página

Assembly

Clearing Blockages

Removing debris from the Turbotool

(VU-02 only)

1. Remove the rubber ring from the

neck of the Turbotool.

2. Lift the top cover from

the Turbotool.

3. Using scissors cut any threads

from the brushbar and remove.

4. To re-assemble the Turbotool

align the tabs at the front of

the lid and close.

Removing debris from the hose

1. Disconnect the hose from the

vacuum cleaner and remove

any blockages and reconnect

the hose securely.

Removing debris from the brushbar

1. Using scissors cut any threads

from the brushbar and remove.

Troubleshooting

Problem

Possible causes

There is an

1. A part(s) is missing from box

accessory missing

1. The unit is not plugged into a

mains socket

2. The power button on the unit has

The vacuum

not been depressed

cleaner does

3. The thermal motor cut out has

not switch on

been activated

4. There is no electricity to the

power socket

1. The accessories are not

correctly fitted

2. There are blockages in the

hose/accessory

The vacuum

cleaner won't

3. The dirt container is full

pick up

4. The filters are blocked/clogged

5. The carpet height adjust slider

setting is not correct

6. The belt is broken/brushbar

not rotating

Dust is escaping

1. The filters/dirt container are not

from the

fitted correctly

vacuum cleaner

2. The filters are damaged

1. The wrong tool is fitted for the task

Accessories

2. The tools are blocked

won't pick up

3. The filters are blocked

dust/debris

4. The dirt container is full

5. The hose/tubes are blocked

1. The filters/dirt container

The blockage

are blocked

indicator (if

2. The dirt container is full

applicable to

3. The accessories/hose/tube

model) activates

are blocked

For help, spares or assistance please

call: 0845 6042377

or visit www.bagsandfilters.com

Solutions

1. Check the 'PARTS' page of your instructions

1. Ensure the plug is firmly in the socket and

switched on

2. Depress the power switch on the unit

3. If the unit has cut out during use, disconnect

the unit from the wall socket, allow to cool

for one hour, clean the filters, empty bin and

check the hose/accessories for blockages

4. Seek expert help from a qualified electrician

1. Check hose/tools are correctly attached to

the machine/hose/tube; refer to 'ASSEMBLY/

OPERATION' section

2. Check the air paths of the hose/accessory are

not obstructed by blockages

3. Check dirt container and if necessary empty

4. Frequently cleaning filters will maintain

performance; see 'MAINTENANCE' section

5. See 'OPERATION' section for correct carpet

height setting for your carpet

6. Disconnect the unit from the power supply,

remove the floor head cover and check the

belt has not detached from the motor spindle

or that the belt is not worn/damaged; see

'MAINTENANCE' section

1. See 'ASSEMBLY' and

'MAINTENANCE' sections

2. If the filters are damaged these will

need to be replaced

1. See 'PARTS' section

2. Check the air paths of the tools are not

obstructed by blockages

3. Frequently cleaning filters will maintain

performance; check 'MAINTENANCE' section

4. Check and empty the dirt container

5. Check the air paths of the hose/tubes are not

obstructed by blockages

1. Frequently cleaning filters will

maintain performance; check

'MAINTENANCE' section

2. Check and empty dirt container

3. Check the air paths of the accessories/hose/

tubes are not obstructed by blockages