Crow EDS-3000 Instruções de instalação e manual do utilizador - Página 9
Procurar online ou descarregar pdf Instruções de instalação e manual do utilizador para Acessórios Crow EDS-3000. Crow EDS-3000 20 páginas. Outdoor double optics pir + mw detector with pet immune
Imprimir página
6
Detector Installation
Important! Prior to installation, read both "Operation" and "Selecting the mounting location"
sections carefully.
1. Install the detector in such manner that the intruder
is most likely to cross the detection area from side to
side.
3. Make sure to attach the metal bracket to a leveled
straight and firm wall, leaving 15cm (6 inches) from
the top and 15cm (6 inches) from both sides, for easy
installation and maintenance.
alarm shop
5. Open the detector unwinding the bottom screw.
7. Release the detector body from the metal bracket
by polling front and up.
2. The detector is to be installed at height of 0.8 to 1.5
meter (2.6 to 4.9 ft)
4. Rotating the detection beam may be required for
guarding a side window opening while the detector is
installed facing another direction.
6. Release the rear metal bracket by unwinding
internal bottom screw.
8. Attach the rear bracket to the wall or a pole using
mounting screws or metal bands.
9