Epson Stylus COLOR 900G Manual de informações do produto - Página 4
Procurar online ou descarregar pdf Manual de informações do produto para Acessórios para impressoras Epson Stylus COLOR 900G. Epson Stylus COLOR 900G 13 páginas. Epson stylus color 900g: release note
Também para Epson Stylus COLOR 900G: Ficha de especificações (2 páginas), Ficha de informação do produto (4 páginas), Nota de lançamento (1 páginas)
Imprimir página
EPSON Stylus COLOR 900
Electrical
Specification
120 V Model
Input voltage range
99 V to 132 V
Rated frequency range
Input frequency range
Rated current
0.7 A
Power consumption
Approx. 30 W (ISO 10561 Letter Pattern)
* Also designed for IT power systems with Phase to Phase voltage
220–240 V
Environmental
Temperature
Operation
50 to 95 °F (10 to 35 °C)
Storage
4 to 104 °F ( 20 to 40 °C)
1 month at 104 °F (40 °C)
Transit*
–4 to 140 °F (–20 to 60 °C)
120 hours at 140 °F (60 °C)
Humidity (without condensation)
Operation
20 to 80% RH
Storage*
5 to 85% RH
*Stored in shipping container
Safety Approvals
Safety standards
UL 1950 with D3, CSA C22.2 No. 950
EMC
FCC part 15 subpart B class B
4 - EPSON Stylus COLOR 900
240 V Model*
198 V to 264 V
50 to 60 Hz
49.5 to 60.5 Hz
0.4 A
Interfaces
Parallel interface
Forward channel
Specification
Description
Data format
8-bit parallel, IEEE-1284 compatibility mode
Synchronization
STROBE pulse
Handshake timing
BUSY and ACKNLG signals
Signal level
TTL compatible
Connector
57-30360 Amphenol connector or equivalent
Reverse channel
Specification
Transmission mode
Adaptable connector
Synchronization
Handshaking
Signal level
Data transmission timing
Serial interface
Specification
Standard
Synchronization
Bit rate
Handshaking
Word format
Connector
Recommended cable
USB interface
Specification
Standard
Bit rate
Data encoding
Adaptable connector
Recommended cable
length
1/99
Description
IEEE-1284 Nibble mode
57-30360 Amphenol connector or equivalent
Refer to the IEEE-1284 specification
Refer to the IEEE-1284 specification
IEEE-1284 Level 1 device
Refer to the IEEE-1284 specification
Description
Based on RS-423
Synchronous
Approximately 1.8 Mbps
X-ON/X-OFF and DTR protocol
Data bit: 8 bits
Parity bit: None
Start bit: 1 bit
Stop bit: 1 bit
8-pin mini-DIN
®
ImageWriter
II cable (preferably Belkin brand)
Description
Based on Universal Serial Bus Specifications
Revision 1.0, Universal Serial Bus Device Class
Definition for Printing Devices Version 1.0
12 Mbps (full speed device)
NRZI
USB Series B
6.5 feet (2.0 meters)