Dill 1504-572 Manual - Página 6

Procurar online ou descarregar pdf Manual para Acessórios para automóveis Dill 1504-572. Dill 1504-572 12 páginas. Tpms trailer kit

Imprimir página

2.2 Install the valve stem assembly

via ratchet body into the transmit-

ter. Slide the body into the trans-

mitter. Verify the teeth from the

ratchet body is opposite from the

transmitter teeth.

2.3 Insert the valve stem through the

rim hole and verify that the rubber

grommet is seated against the rim

hole surface.

2.4 Adjust the angle of the transmitter

body and verify the transmitter is

resting flat against the wheel rim

surface.

2.5

Verify 3 conditions when installing

the transmitter assembly onto the

wheel rim:

2.5.1 At least one of the transmit-

ter‟s feet always contacts the rim

surface.

2.5.2 The grommet is fully seated

against the valve hole.

2.5.3 From the outside of the wheel, the valve stem is perpendicular to the

rim‟s valve hole.

2.6 Place the metal washer and hex nut on the valve stem and turn the hex nut

clockwise until the rubber grommet is pressed against the wheel rim sur-

face.

2.7

Tighten the hex nut 35 to 40 inch pounds of torque to secure the valve stem

to the rim. Verify at least one of the transmitter‟s feet has direct contact on

the wheel rim surface. If not, uninstall the transmitter and redo it from 2.5.

2.8 Lock the wheel rim on

the tire changer. Apply

lubricant on both tire

beads and rim. Mount

the lower tire bead on

the rim. Ensure that

the tire bead does not

touch the electronic

module during mount-

ing.

2.9 Mount the upper tire

bead the same way

and inflate the tire to

standard cold inflation

Transmitter

Ratchet

Body

To remove the valve stem assembly,

carefully slide the valve stem ratchet

body completely off the transmitter

Transmitter

Ratchet

Body

Transmitter

Teeth

Wheel Mount

Head

Wheel Mount

Head