Epson Stylus PHOTO 1290 Manual de configuração - Página 14

Procurar online ou descarregar pdf Manual de configuração para Acessórios para impressoras Epson Stylus PHOTO 1290. Epson Stylus PHOTO 1290 18 páginas. Color inkjet printer
Também para Epson Stylus PHOTO 1290: Brochura e especificações (24 páginas), Especificações (3 páginas), Substituição de cartuchos (2 páginas), Manual de configuração (17 páginas), Manual de instruções de instalação (8 páginas)

While the ink is charging, the P power light

flashes and the printer produces a variety of

mechanical sounds. These sounds are normal.

When the ink delivery system has been charged, the print head returns

to the home (far right) position and the P power light comes on.

Close the printer cover.

Checking the printer

Before printing your first page, you need to make sure that the printer is

working correctly by loading paper, then printing a nozzle check page and,

if necessary, cleaning the print head. Refer to the section below.

Follow the steps below to load plain paper in the printer.

Lower the output tray and slide out the extension. Next, slide the left

edge guide so that the distance between the edge guides is slightly

wider than the width of your paper.

Fan a stack of paper, then tap it on a flat surface to even the edges.

Load the stack of paper in the sheet

feeder with the printable side up

and the right edge of the paper

resting against the right edge guide.

Then, slide the left edge guide

against the left edge of the paper.

Note:

❏ Always load paper into the sheet

❏ Make sure that the paper stack fits under the arrow mark inside the edge

Downloaded from:

Caution:

Always press the e ink cartridge replacement

button to move the print head. Do not move the

print head by hand. Doing so may damage the

printer.

Caution:

Never turn off the printer while the P power light is flashing.

feeder short edge first.

guide.

http://www.usersmanualguide.com/

printable

side up