AEMC instruments DIGITAL FLEXPROBE 400D-24 Manual do utilizador - Página 13

Procurar online ou descarregar pdf Manual do utilizador para Instrumentos de medição AEMC instruments DIGITAL FLEXPROBE 400D-24. AEMC instruments DIGITAL FLEXPROBE 400D-24 20 páginas.

Imprimir página
3.2.4
To search for a maximum, for example a spike lasting at least 100ms,
press the HOLD (MAX > 2s) button for more than two seconds.
The Max symbol will display and the instrument will begin measuring.
The Digital Flexprobe
displayed. If the new measurement is greater than the old, it replaces it
in the display.
To return to the real-time display mode, press the HOLD (MAX > 2s)
button again.
3.2.5
If there is no activity after 10 minutes, the Digital Flexprobe
automatically (unless the MAX function is active) to preserve battery life.
To deactivate the Auto Power OFF feature, press the
buttons simultaneously when turning the instrument on.
To reactivate automatic switching off, switch the device off, then back on.
3.2.6
When the battery voltage drops and the remaining battery life of the
instrument is approximately one hour, the
display.
When the battery voltage is too low to guarantee the accuracy of a
measurement, the
replaced (see § 5.2).
3.2.7
Turn off the device by pressing the
lever to open the flexible sensor. Remove the sensor from the conductor.
12
1.800.561.8187

Search for Maximum

®
compares each new measurement to the one

Auto Power OFF

Low Battery

symbol lights steadily. The batteries must then be

Disconnecting

www.
M
AX
A
button. Press the yellow opening
Digital Flexprobe
.com
®
turns off
and HOLD
symbol blinks on the
®
Models 400D & 4000D