AEMC instruments FlexProbe 24-3001 Manual do utilizador - Página 6

Procurar online ou descarregar pdf Manual do utilizador para Instrumentos de medição AEMC instruments FlexProbe 24-3001. AEMC instruments FlexProbe 24-3001 17 páginas. Flexible ac current probe

Imprimir página

The FlexProbe

ments on conductors where standard clamp-on probes could not be

used. In particular, it can be installed in tight spaces, around breaker

panels, around cable bundles, around wide or large bus bars, or even

wrapped around irregular shapes.

The Shape Memory feature enables the user to "pre-shape" the sensor

before inserting it between or around conductors. This feature facilitates

The FlexProbe

is lightweight. It does not use magnetic cores like standard

transformers. The transformation principle is based on an air core. It

presents virtually no load to the system under test, has a low phase shift

and excellent frequency response, and cannot be damaged by overloads.

The sensor assembly is waterproof and insulated for 1000V CAT III;

600V CAT IV. The FlexProbe

meets EN 61010-1 and is CE marked.

The FlexProbe

has a mV output proportional to the current measured

for direct readings on DMMs, data loggers, oscilloscopes, and power or

harmonic meters. TRMS measurements are taken when connected to a

TRMS meter. The FlexProbe

is insensitive to DC currents and only the AC

component of the measured signal is measured. The sensor length is 24".

GlobalTestSupply

www.

.com

Find Quality Products Online at:

[email protected]