Epson ActionDesk 4000 Especificações - Página 6
Procurar online ou descarregar pdf Especificações para Ambiente de trabalho Epson ActionDesk 4000. Epson ActionDesk 4000 12 páginas. Product support bulletin(s)
Também para Epson ActionDesk 4000: Manual de informações do produto (8 páginas), Boletim de apoio ao produto (1 páginas)
Imprimir página
EPSON ActionDesk 4000+
Microprocessor Upgrades
The computer's processor can be upgraded by replacing the
existing microprocessor with a faster one. You can either
purchase an upgrade kit from Epson or buy the individual
components separately, as listed in the following table.
Microprocessor upgrade components
*For the SX/25, SX/33, and DX/33 processors
**For the DX/50, DX2/50, DX2/66, and Pentium OverDrive processor
SX/25, SX/33, and DX/33 processors require a heat sink.
DX/50, DX2/50, DX2/66, and Pentium OverDrive
processors require a heat sink and a fan. Make sure jumpers
J16, J17, and J19 are set correctly for the new processor.
Fan Installation
Some upgrade kits for processors that require both a heat
sink and a fan contain a separate fan assembly. Secure the fan
to the bracket using the long screws and the nuts. Then
secure the bracket to the chassis with the short screws.
Connect the fan connector to J12, aligning the small triangle
on the case of the connector with pin 1.
EPSON ActionDesk 4000+ - 6
Hard Disk Drive Types
This system comes with a hard disk auto-sensing feature.
When you press Enter with the cursor positioned on the
Autotype Fixed Disk option in SETUP, the system
detects the type of hard disk drive you have installed and fills
in the drive information using values in the following table.
Hard disk drive types
Actual formatted size may be slightly different than size on drive label; you
l
cannot change this value.
12/93